Mariner 4WD V6-3.0L (2010)
2. Remove the O/D (4, 5, 6) clutch hub, No 2 thrust bearing See Figure 33.
3. Remove the O/D (4, 5, 6) clutch snap ring. See Figure 33.
4. Remove the O/D (4, 5, 6) clutch pressure plate and discard the clutch pack. See Figure 33.
5. Install the Overdrive Clutch, Balance Piston and Direct Clutch Compressor # 30758911 and Forward/Intermediate Spring Compressor 30758412 on
the balance piston.
6. Using a press compress the O/D (4, 5, 6) clutch return spring and remove the snap ring. See Figure 34.
7. Remove the Overdrive Clutch Balance Piston and Direct Clutch Compressor # 307-589/1 and Forward/Intermediate Spring Compressor # 307584/2.