Mariner 4WD V6-3.0L (2010)
-
Tighten to 12 Nm (106 lb-in).
3.0L engine
8. Drain the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in Cooling System &/or Engine
Block Heater.
9. Disconnect the upper radiator hose from the coolant pump housing and position it aside.
10. Disconnect the lower radiator hose from the thermostat housing and position it aside.
All vehicles
11. Disconnect the selector lever cable end from the manual control lever.
12. Remove the nut and the manual control lever.
13. Disconnect the transaxle vehicle harness electrical connector.
14. Remove the transaxle electrical wiring harness retainers from the transmission fluid pan stud bolts.