Mariner 4WD V6-3.0L (2010)
13. Move the Safety Canopy(R) module forward and release the rear hook.
Installation
WARNING: Before installing a Safety Canopy(R) or side air curtain module, inspect the roofline for any damage. If necessary, the sheet metal
must be reworked to its original condition and structural integrity. Install new fasteners if damaged and remove foreign material. Failure to
follow these instructions may result in the Safety Canopy(R) or side air curtain deploying incorrectly, which increases the risk of serious
personal injury or death in a crash.
WARNING: Make sure no one is in the vehicle and there is nothing blocking or placed in front of any air bag module when the battery is
connected. Failure to follow these instructions may result in serious personal injury in the event of an accidental deployment.
WARNING: Do not obstruct or place objects in the deployment path of the Safety Canopy(R) or side air curtain module. Failure to follow this
instruction may result in the Safety Canopy(R) or side air curtain module deploying incorrectly and increases the risk of serious personal
injury or death in a crash.
WARNING: Never put any type of fastener or tie strap around any part of a Safety Canopy(R) module, side air curtain module or interior trim
panel. This will prevent the Safety Canopy(R) or side air curtain module from deploying correctly. Failure to follow this instruction may
increase the risk of serious personal injury or death in a crash.
WARNING: Always use new torque-prevailing type J-nuts when installing the Safety Canopy(R) in the vehicle. Use of these J-nuts is
mandatory to reduce the risk of loss of fastener effectiveness. Failure to follow this instruction may result in the Safety Canopy(R) module
deploying incorrectly and increases the risk of serious personal injury or death in a crash.
1. WARNING: Always use new torque-prevailing type J-nuts when installing the Safety Canopy(R) in the vehicle. Use of these J-nuts is
mandatory to reduce the risk of loss of fastener effectiveness. Failure to follow this instruction may result in the Safety Canopy(R) module
deploying incorrectly and increases the risk of serious personal injury or death in a crash.
Install new Safety Canopy(R) module J-nuts.
2. NOTE: If equipped with a roof opening panel and/or rear window wiper assembly, make sure of correct roof opening panel drain hose and/or rear
window solvent hose routing.
Position the Safety Canopy(R) module and insert the rear hook into the sheet metal cavity.
