Mariner 4WD V6-3.0L (2010)
Seat Heater Switch: Service and Repair
Seat Control Switch
Seat Control Switch
Removal and Installation
NOTE: For component identification and locations, refer to Seat - Exploded View, Front See: Body and Frame/Seats/Service and Repair/Seat -
Exploded View, Front.
1. Remove the recliner handle cover.
2. Remove the seat control switch knob.
3. Remove the outboard side shield.
-
Remove the 3 screws and detach the side shield.
-
Disconnect the seat control switch electrical connector.
4. Remove the knob and seat control switch.
5. To install, reverse the removal procedure.