Mariner 4WD V6-3.0L (2010)
Steering Wheel: Service and Repair
Steering Wheel
Removal and Installation
1. Remove the driver air bag module. For additional information, refer to Restraint Systems.
2. Disconnect the steering wheel switch electrical connector from the clockspring.
-
Detach the steering wheel switch wiring from the retainers and position the wires aside.
3. Remove the steering wheel bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
4. NOTICE: Do not allow the Steering Wheel Puller to damage the steering wheel switch wires and connector while removing the steering
wheel.
Using the Steering Wheel Puller, remove the steering wheel.
