mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
A/T - Hoot Noise At Low Speed From A Stop|Page 4204 > < A/T - Hoot Noise At Low Speed From A Stop|Page 4202

Mariner 4WD V6-3.0L (2010)

Page 6
background image

20. Simultaneously install the drive/driven sprocket and chain assembly by first seating the drive sprocket then seat the driven sprocket, Lightly tap on

the driven sprocket to be sure it is fully seated in the case. (Figure 13)

21. Install the No.11 thrust bearing. (Figure 14)

A/T - Hoot Noise At Low Speed From A Stop|Page 4204 > < A/T - Hoot Noise At Low Speed From A Stop|Page 4202