Mariner 4WD V6-3.0L (2010)
3.0L engine
16. Connect the lower radiator hose onto the thermostat housing.
17. Connect the upper radiator hose onto the coolant pump housing.
All vehicles
18. Install the LH splash shield and the retainers.
3.0L engine
19. Install the RH splash shield and the retainers.
2.5L engine
20. Install the ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
3.0L engine
21. Install the ACL outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.
22. Fill and bleed the cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding in Cooling System &/or
Engine Block Heater.
All vehicles
23. Fill with clean transmission fluid to the correct level.