Mariner 4WD V6-3.0L (2010)
Installation
1. If installing new transmission fluid cooler tubes, remove the transmission fluid cooler tube secondary latches and the retainer from the old
transmission fluid cooler tubes and install them on the new transmission fluid cooler tubes.
2. Position the transmission fluid cooler tubes in place. Install the transmission fluid cooler tubes in the transaxle by inserting the tube into the fitting
until a click is heard/felt. Pull back to confirm connection is secure and install the transmission fluid cooler tube secondary latches.
3. Compress the constant tension clamps and install the transmission fluid cooler tubes on the transmission fluid cooler.
4. Install the transmission fluid cooler tubes in the retaining clip and close the retaining clip.