Mariner 4WD V6-3.0L (2010)
8. Install the Engine Lifting Chain and Adapter and support the engine and transaxle.
All vehicles
9. Remove the LH support insulator.
1. Remove the LH support insulator through bolt.
-
To install, tighten to 103 Nm (76 lb-ft).
2. Remove the top LH support insulator bolts.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the side LH support insulator bolts.
-
To install, tighten to 48 Nm (35 lb-ft).
4. Remove the LH support insulator.
10. To install, reverse the removal procedure.
