Mariner 4WD V6-3.0L (2010)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal
Removal and Installation
1. Disconnect the master cylinder push rod.
2. Remove the 2 clutch master cylinder nuts.
-
To install, tighten to 23 Nm (17 lb-ft).
3. Remove the clutch pedal and bracket assembly nut.
-
To install, tighten to 23 Nm (17 lb-ft).
4. Remove the clutch pedal and bracket assembly.
5. To install, reverse the removal procedure.