Mariner 4WD V6-3.0L (2010)
4. Remove the bolts and the lateral support crossmember.
-
To install, tighten to 115 Nm (85 lb-ft).
5. Remove the lower insulator through bolt.
-
To install, tighten to 115 Nm (85 lb-ft).
4. Remove the bolts and the lateral support crossmember.
-
To install, tighten to 115 Nm (85 lb-ft).
5. Remove the lower insulator through bolt.
-
To install, tighten to 115 Nm (85 lb-ft).