Mariner 4WD V6-3.0L (2010)
Transmission Mount: Service and Repair
Rear
Transaxle Support Insulator - Rear
Transaxle Support Insulator - Rear
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the rear insulator through bolt.
-
To install, tighten to 115 Nm (85 lb-ft).
3. Remove the rear insulator nuts and bolt.
-
To install, tighten to 80 Nm (59 lb-ft).