Mariner 4WD V6-3.0L (2010)
Seals and Gaskets: Service and Repair
Drive Pinion Seal
Drive Pinion Seal
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Index-mark the driveshaft flange and the pinion flange.
3. NOTE: Support the driveshaft.
Disconnect the rear driveshaft U-joint flange.
-
Remove and discard the 4 bolts.
-
Position aside the driveshaft and flange.
