Mariner 4WD V6-3.0L (2010)
2. NOTE: Lubricate the pinion flange with grease.
Line up the index marks and position the pinion flange.
3. Using the Drive Pinion Flange Holding Fixture, install a new pinion nut.
-
Tighten to 244 Nm (180 lb-ft).
4. Line up the index marks and position the rear driveshaft and U-joint flange.
-
Install the 4 new bolts.
-
Tighten to 70 Nm (52 lb-ft).