Mariner 4WD V6-3.0L (2010)
Wiper Arm: Adjustments
Wiper Blade and Pivot Arm Adjustment - Windshield
Wiper Blade and Pivot Arm Adjustment - Windshield
1. Cycle and park the windshield wipers.
2. Verify that the RH and LH wiper blades are located at the specified position.
3. NOTE: Make sure there is no mechanical binding in the linkage preventing the wiper arms from returning to the fully parked position.
NOTE: A suitable 2 jaw puller may be necessary to remove the wiper arms.
If not within specification, remove the nuts and the windshield wiper pivot arms and reposition them to the correct locations.
-
To install, tighten to 40 Nm (30 lb-ft).