Mariner 4WD V6-3.0L (2010)
Wiper Arm: Service and Repair
Wiper Mounting Arm and Pivot Shaft
Wiper Mounting Arm and Pivot Shaft
Removal and Installation
1. Remove the cowl panel grille.
2. Remove the 3 windshield wiper mounting arm and pivot shaft assembly bolts and the windshield wiper mounting arm and pivot shaft assembly.
-
To install, tighten to 9 Nm (80 lb-in).
3. Disconnect the windshield wiper motor electrical connector.
4. Remove the wiper motor assembly. For additional information, refer to Wiper Motor - Windshield See: Wiper Motor/Service and Repair/Wiper
Motor - Windshield.
5. To install, reverse the removal procedure.