Mariner 4WD V6-3.0L (2010)
Wiper Arm: Service and Repair
Wiper Pivot Arm - Rear
Wiper Pivot Arm - Rear
Removal and Installation
1. Open the wiper pivot arm cover.
2. Remove the pivot arm nut.
-
To install, tighten to 12 Nm (106 lb-in).
3. NOTE: A suitable 2 jaw puller may be necessary to remove the wiper arms.
Remove the wiper pivot arm.
4. To install, reverse the removal procedure.
-
Adjust the wiper pivot arm. For additional information, refer to Wiper Blade and Pivot Arm Adjustment - Rear See: Adjustments/Wiper Blade
and Pivot Arm Adjustment - Rear.