mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Heater Core - Leakage Diagnostic Tips|Page 2241 > < Heater Core - Leakage Diagnostic Tips|Page 2239
Page 3
background image

20.

Working in passenger compartment, remove screws attaching heater case support bracket and air inlet duct support bracket to cowl top panel.

21.

Remove nut retaining bracket at left end of heater case to dash panel and nut securing bracket below case to dash panel.

22.

Pull heater case away from dash panel to gain access to heater core access cover attaching screws.

DISASSEMBLE THE HEATER CASE:

23.

Remove heater core access cover attaching screws and the cover.

24.

Remove heater core and seals from heater case, Fig. 7.

25.

Remove the 2 seals from heater core tubes.

26.

Reverse procedure to install.

With Air Conditioning

Fig. 9 Instrument panel trim panel (Typical). 1982 Cougar XR-7, Thunderbird & 1983-86 LTD & Marquis

REMOVE THE INSTRUMENT PANEL ASSEMBLY:

1.

Disconnect battery ground cable.

2.

Remove steering column cover assembly, then remove left and right finish panels, Fig. 9.

Heater Core - Leakage Diagnostic Tips|Page 2241 > < Heater Core - Leakage Diagnostic Tips|Page 2239