mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Wiring Connectors - Engine Speed Increase|Page 4346 > < ISC Motor - High Engine Idle Speed
Page 1
background image

Idle Speed/Throttle Actuator - Electronic: All Technical Service Bulletins
Wiring Connectors - Engine Speed Increase

Article No. 85-12-14

ENGINE SPEED INCREASE - 3.8L
-

HARNESS CONNECTIONS

FORD 1984-85 LTD, THUNDERBIRD

LINCOLN-MERCURY 1984-85 MARQUIS, COUGAR

Road splash or antifreeze (a conductive solution) entering the back of the connectors that connect the 14401 wire harness to the 14290 and to the 14289
wire harnesses can cause a short circuit. The short can cause the Idle Speed Control motor shaft to extend and result in increased idle speeds. A six-pin
connector connects the 14401 to the 14289 wire harness and a 12-pin connector connects the 14401 to the 14290 wire harness.

Concerns of increased idle speeds can be serviced by cleaning both connectors and packing them with grease.

Figure 11

Wiring Connectors - Engine Speed Increase|Page 4346 > < ISC Motor - High Engine Idle Speed