Marquis V6-232 3.8L VIN 3 TBI (1985)
Figure 12
1.
Inspect both connectors for the presence of any foreign substance. The connector configurations and locations are shown. See Figures 11 and
12.
2.
Clean and thoroughly dry the connector with shop air. Pack the harness ends of each connector with Lubriplate DS-ES grease to make it
moisture resistant.
3.
Confirm that ISC motor is properly adjusted. (See 1985 Shop Manual, Volume H, page 4-62.)
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Reimbursable within the provisions of the Warranty and Policy Manual.
OPERATION: SP144O1A85
TIME:
0.4 Hr. DLR. CODING: Basic Part No. 14401 - Code: 46
