Marquis V6-232 3.8L VIN 3 TBI (1985)
For details on removal and installation, refer to the 1985 Shop Manual, Volume B, Section 13-46-8. Use the Mark VII/Continental procedure, skipping
all steps for diesel operation.
NOTE:
The most important change in service procedure is the new installation torque of 41-54 N-m (30-40 ft.lbs.).
Should the sleeve be damaged, it can be replaced. Remove the sleeve by collapsing it with a pair of visegrip (R) pliers and twisting and pulling. Install
the new sleeve and draw it into position with the mounting bolt during gear installation.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
