mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

All Other Service Bulletins for Idle Speed:|84323 > < Idle Speed Setting - Shop Manual Revision
Page 1
background image

Idle Speed: All Technical Service Bulletins
Carburetor - Idle Speed Set Procedure

Article No. 84-3-14

IDLE SPEED SET PROCEDURE - CARBURETOR MODEL 2150 2V

FORD 1984 LTD

LINCOLN-MERCURY 1984 MARQUIS

The attached chart should be substituted in the 1984 Shop Manual, Section 15-1.

3.8L engine calibration 4-14B (Post Job 1) was introduced for the LTD/Marquis vehicles to satisfy production requirements. The speed setting
procedures for

1983 3.8L Canadian (2150-2V) apply to the above calibration.

Refer to the 1984 Engine Diagnostics Manual Section 4 3.8L Passenger - Canada for curb idle, fast idle and A/C on speed settings. Replace the current
initial timing procedure with the revised timing procedure included in this TSB.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"

Initial Timing Procedure

PRELIMINARY NOTE

The procedure described on the following page for setting initial timing is to be used under normal circumstances. If problems are encountered setting
initial timing using this procedure, the spark timing procedure is to be used to diagnose the problem.

All Other Service Bulletins for Idle Speed:|84323 > < Idle Speed Setting - Shop Manual Revision