Merkur Scorpio V6-179 2.9L (1989)
Seat Belt Buckle: Service and Repair
Front Seats
NOTE: If the retractor of a new seat belt assembly has been mounted into a damaged or distorted area the new retractor may be mounted at an incorrect
angle. Non-extension of webbing may result. Service mounting area as necessary and install retractor.
REMOVAL
1. Remove D-ring retainer. Remove edge of front and rear door weatherstrips from edge of pillar trim panels. Remove attaching screw from pillar
center trim panel. Remove panel.
2. Remove webbing guide attaching screws and guide.
3. Remove upper pillar trim attaching screw and remove trim.
4. If driver's side D-ring mounting plate is to be detached, remove two Torx bolts retaining D-ring mount plate to pillar.
NOTE: The D-ring mounting plate is a separate service item and should be replaced if vehicle has sustained accident damage.
