Merkur Scorpio V6-179 2.9L (1989)
Suspension Strut / Shock Absorber: Service and Repair
Rear
1.
Remove luggage compartment floor covering.
2.
Remove trim panels from wheel housing and side panel.
3.
Remove shock absorber trim cover from rear wheel housing.
4.
Raise and support rear of vehicle.
5.
Position jack under control arm and raise it enough to relieve tension from shock absorber.
6.
Remove nut and bolt attaching upper end of shock absorber.
7.
Remove lower nut and bolt and the shock absorber.
8.
Reverse procedure to install. Torque upper and lower attaching nuts to 30-36 ft. lbs. and lower bolt to 33-40 ft. lbs.
