Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Coolant Reservoir: All Technical Service Bulletins
Coolant Reservoir - Coolant Leak At Filler Neck
Article No. 88-16-9
^
COOLING SYSTEM - EXPANSION TANK LEAKS AT FILLER NECK - VEHICLES BUILT BEFORE 11/19/87
^
LEAK -ENGINE COOLANT FROM EXPANSION TANK AT FILLER NECK - VEHICLES BUILT BEFORE 11/19/87
MERKUR:
1985-88 XR4Ti
ISSUE:
An engine coolant leak at the filler neck of the expansion tank may be caused by coolant seeping out between the plastic filler neck and the
steel filler neck insert. A coolant leak in this area can be identified by a white crusty residue on the exterior of the expansion tank.
ACTION:
To correct this, install a new design expansion tank that has improved sealing qualities. Refer to the Merkur XR4Ti Shop Manual, Section
27 for removal and installation instructions.
PART NUMBER
PART NAME
CLASS
E6RY-8A080-B
Expansion Tank
B
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: Eligible Under Basic Warranty Coverage
OPERATION: 881609A
TIME:
0.3 Hr.
DLR. CODING:
Basic Part No. 8A080
Condition Code: 45
