Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Radiator: Technical Service Bulletins
Radiator - Coolant Drain Procedure
Article No. 85-15-4
RADIATOR - COOLANT DRAIN
PROCEDURE - AUTOMATIC TRANSMISSION ONLY
MERKUR 1985 Merkur XR4Ti
The drain valve used to drain the coolant on Merkur XR4Ti's equipped with automatic transmissions is designed with a threaded plastic plug located on
the back of the radiator in the lower right hand corner. This plug has a recessed "X" in the face to accept a large screwdriver or other flat bladed tool. To
drain the coolant from the vehicle's radiator, remove the drain valve from the radiator.
OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS: "INFORMATION ONLY"
