mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Temperature Gauge - Slow Response At Warm-Up|Page 6531 > < Temperature Gauge - Slow Response At Warm-Up
Page 1
background image

Temperature Sensor (Gauge): Technical Service Bulletins
Coolant Temperature Sending Unit - Location Change

Article No. 85-5-14

GAUGE - TEMPERATURE - SENDER UNIT LOCATION CHANGE

LINCOLN-MERCURY 1985 MERKUR XR4Ti

Figure 22 - GAUGE - TEMPERATURE - SENDER UNIT LOCATION CHANGE

Subsequent to shop manual publication, the engine coolant temperature sending unit has been relocated for improved gauge accuracy. The location
shown in the illustrations in the 1985 Merkur Shop Manual, page 34-20-2, and the Electrical Vacuum Trouble Shooting Manual, page 32, are incorrect.
The correct location is shown in Figure 22. As this was a late running production change, some early vehicles have the former sending unit in the old
location, but it is not utilized as they are also equipped with the new sender in the new location. Current production units have a plug in the old location.
WARRANTY STATUS: "INFORMATION ONLY"

Temperature Gauge - Slow Response At Warm-Up|Page 6531 > < Temperature Gauge - Slow Response At Warm-Up