Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
FIGURE 2 - TURBOCHARGER BOOST CONTROL MODULE AND SOLENOID
REMOVAL AND INSTALLATION
Solenoid Assembly
Removal and Installation
1.
Remove air cleaner assembly. Refer to Section 24- 41.
2.
Remove control solenoid hose clamps at turbocharger. Carefully pull hoses away from fittings on turbocharger.
3.
Remove two screws holding solenoid assembly to fender (Fig. 2).
4.
To install, reverse Steps 1, 2 and 3.
Fuel Selector Switch (1987-88 Thunderbird only)
Removal and Installation
1.
Remove switch assembly. Refer to Chassis/Electrical Manual, Section 35-21.
2.
Turn switch assembly over, disconnect electrical connectors and remove switch.
3.
To install, reverse Steps 1 and 2.
