Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
information.
^
Dealers without DWE capability must mail the second copy of a completed Form 1864 to Warranty Claims Processing at Oakville for
reimbursement. Forms submitted must show all parts used and their cost, the parts handling allowance, and be imprinted, dated and signed by
authorized dealership personnel.
^
All claims must show 90S17 in the recall box.
Attachment II - Labor and Parts Information
Labor Allowances
OPERATION DESCRIPTION
LABOR TIME
LABOR CODE
Install New Fuel Filter and Fuel Lines
0.8 Hrs.
B
Administrative Allowance
0.1 Hrs.
NOTE:
The 0.1 hour Administrative Allowance must be added to the total labor time before inputting.
Parts Ordering Information
Parts will not be direct shipped for this recall. Order requirements through your Servicing Parts Distribution Centre.
PART NUMBER
DESCRIPTION
F1DZ-9155-A
Fuel Lines and Filter Kit
Kit Contains:
^ One "PUMP-TO-FILTER" Fuel Line
^ One "SUPPLY-TO-ENGINE" Fuel Line
^ One "FILTER-TO-SUPPLY-LINE" Fuel Line
^ Three tie straps (95874-S)
^ One copper washer (E6TZ-9374-A)
^ One fuel pump nipple (E6TZ-9416-A)
^ One fuel filter (FG-872)
^ Instruction Sheet
Attachment III - Technical Information
The new stainless steel reinforced Teflon(r) fuel lines replace the three nylon fuel lines that connect the fuel pump to filter, fuel filter to forward steel line
and forward steel line to fuel rail damper. The existing in-line fuel filter and high pressure fuel pump outlet fitting will also be replaced.
Fuel System Pressure Relief
CAUTION
Fuel supply lines on EFI engines will remain pressurized for some period of time after the engine is shut off. This pressure must be relieved before
servicing of the fuel system.
Before opening the fuel supply system, relieve fuel pressure as follows:
1.
Remove fuel tank cap.
2.
Disconnect the vacuum hose from the fuel pressure regulator located on the engine fuel rail.