Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
1.
Disconnect battery ground cable, then remove steering column upper and lower shrouds.
2.
Remove two Phillips head screws and the guide switch assembly from the steering column, Figs. 5 and 6.
3.
Disconnect electrical connectors at switch, then remove switch.
INSTALLATION
1.
Connect electrical connectors at switch.
2.
Position switch on mounting bracket and retain with two Phillips head screws.
3.
Install upper and lower steering column shrouds and reconnect battery ground cable.
