Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Alignment: Specifications
Caster Angle
+1 to +3 deg
Desired Caster
2 deg
Camber Angle
Front - 1 1/2 to -1/2 deg
Rear
1/2 deg
Desired Camber Angle
Front
Note: Camber angle varies with ride height. With ride
height measured from center of wheel to bottom of wheel
opening molding, camber should be as follows: -2 deg 50' to
-1/2 deg @ 13.8-14.1 inches; -2 deg 28' to -.08' @14.2-14.5
inches; -2 deg 06' to +15' @ 14.6-14.9
Rear
Note: Camber angle varies with ride height. With ride
height measured from center of wheel to bottom of wheel
opening molding, camber should be as follows: -2 deg 50' to
-1/2 deg @ 13.8-14.1 inches; -2 deg 28' to -.08' @14.2-14.5
inches; -2 deg 06' to +15' @ 14.6-14.9
Toe
Front 1/32 - + 1/8 in
Rear
- 5/6 to +11/64 in