Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Figure 3
1.
Spindle carrier installation.
a.
Insert the spindle carrier lever (T85M-3206-A) into the new spindle carrier slot, Figure 3.
b.
Rotate the spindle carrier lever 90~.
c.
Slide the spindle carrier assembly onto the strut.
d.
Align the bolt hole and install a new pinch bolt.
e.
Tighten the pinch bolt to 59-66 ft.lbs. (80-90 N-m).
Figure 4
2.
Using a control arm bushing remover (T88M-5493-A) or equivalent, carefully remove the stabilizer bar bushings from the lower control arm,
Figure 4.
3.
Position the lower control arm in a vise.
4.
Install the bushings.
a.
Position one bushing on the lower control arm.