Merkur Xr4ti L4-140 2.3L SOHC Turbo (1985)
Figure 14
38.
Position a new gasket and install the new extension housing (E8RY-7A039-A). Be sure the flat on the countershaft and the matching flat in the
extension housing are properly aligned, Figure 14.
NOTE:
Be sure that the pin in the extension housing engages the spring on the shift rail properly.
Figure 15
39.
Install the extension housing attaching bolts. Tighten the attaching bolts to 33-36 ft.lbs. (40- 49 N-m), Figure 15. Apply Pipe Sealant (D8AZ-
19540-A), or equivalent, on the threads of the three (3) bolts entering the transmission case.
40.
Shift the transmission into reverse gear.