Milan L4-2.3L VIN Z (2006)
All vehicles
1. Remove restraints control module (RCM) fuse 25 (7.5A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
Vehicles with seat side air bags and side air curtain modules
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat side air bag module electrical connector.
4. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.
5. Remove the restraint system diagnostic tool from the LH side air curtain module electrical connector.
6. Connect the LH side air curtain module electrical connector.
