Milan L4-2.3L VIN Z (2006)
5. Open the 4 passenger assist handle covers.
-
Remove the bolts and remove the handles.
-
To install, tighten to 5 Nm (44 lb-in).
6. Remove the A-pillar trim panels.
7. Remove the B-pillar trim panels.
8. Remove the C-pillar trim panels.
9. Remove the overhead console.
-
Disconnect the electrical connector.
10. Remove the sun visors and the sun visor clips.
-
If equipped, disconnect the electrical connectors.
11. Remove the 2 headliner pushpins at the rear.
12. CAUTION: To avoid bending or crimping the headliner, an assistant is required for this step.
Remove the headliner through the LH rear door.
13. To install, reverse the removal procedure.