Milan L4-2.3L VIN Z (2006)
15. Install the special tool.
16. CAUTION: Only hand-tighten the bolt or damage to the front cover can occur.
Using the 6 mm (0.23 inch) x 18 mm (0.7 inch) bolt, check the position of the crankshaft pulley.
^
If it is not possible to install the bolt, correct the engine timing.
17. Using the special tool, check the position of the camshafts.
^
If it is not possible to install the special tool, correct the engine timing.
18. Install the CKP sensor.
^
Do not tighten the bolts at this time.