Milan L4-2.3L VIN Z (2006)
Catalytic Converter: Service and Repair
Catalytic Converter
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove and discard the 2 exhaust flexible pipe-to-catalytic converter nuts.
^
Discard the gasket.
^
To install, tighten to 40 Nm (30 ft. lbs.).
3. Remove the Torca clamp.
4. Separate the catalytic converter from the muffler and tailpipe and remove the catalytic converter.
5. To install, reverse the removal procedure.
^
Install a new gasket and nuts.
6. Start the engine and check for exhaust leaks.
