Milan L4-2.3L VIN Z (2006)
4.
Remove backing paper from one (1) side of the UHMW tape and apply the tape to the high density urethane foam pad (Figure 2).
5.
Cut each of the five (5) pieces of foam pad/tape assembled in Step 4 into six (6) 1" (25 mm) wide pieces (Figure 3).
6.
Remove remaining paper backing from the cut pieces of foam/tape and install a piece at seven (7) places around each wheel cover (Figure 4).
NOTE
THE EDGE OF THE FOAM/TAPE PAD ASSEMBLY MUST LINE UP WITH THE OUTSIDE EDGE OF THE WHEEL COVER.
7.
Reinstall wheel covers.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
OPERATION
DESCRIPTION
TIME
052501A
2004-2005 Taurus, 2006
0.8 Hr.