mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Suspension - Front Strut Grunt/Rub/Pop Noises|Page 7009 > < Suspension - Front Strut Grunt/Rub/Pop Noises|Page 7003
Page 1
background image

Strut Mount: Customer Interest
Suspension - Front Strut Grunt/Rub/Pop Noises

TSB 08-18-4

09/15/08

FRONT STRUT NOISE

FORD:
2006-2009 Fusion

LINCOLN:
2006 Zephyr
2007-2009 MKZ

MERCURY:
2006-2009 Milan

ISSUE
Some 2006 Zephyr, 2007-2009 MKZ, 2006-2009 Fusion and Milan vehicles built before 8/5/2008 may exhibit a popping, rubbing, grunting, squeaking,
crunching or creaking type noise from the front strut mount when going over bumps, while driving at 1-10 MPH (1-16 Km/h) and/or during parking lot
maneuvers. Typically, the noise is heard in the front outboard wheel while turning at low speeds. This noise may be caused by the jounce bumper
rubbing against the dry strut plate.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

1.

Raise the vehicle as described in Workshop Manual (WSM), Section 100-02.

2.

Remove front shock absorber and spring assembly per WSM, Section 204-01.

3.

Disassemble the shock absorber and spring assembly per WSM, Section 204-01 under Disassembly and Assembly section.

Suspension - Front Strut Grunt/Rub/Pop Noises|Page 7009 > < Suspension - Front Strut Grunt/Rub/Pop Noises|Page 7003