Milan AWD L4-2.3L (2008)
Communications Control Module: Service and Repair
Audio Control Module (ACM)
AUDIO CONTROL MODULE (ACM)
Removal and Installation
NOTE: It is not necessary to remove the ACM to retrieve the part number.
1. NOTE: Module configuration is only required if a new ACM is being installed.
Upload the ACM configuration information to the scan tool.
2. Remove the instrument panel center finish panel.
-
Disengage the clips.
3. Remove the 4 screws and the ACM.
-
Disconnect the electrical connectors and the antenna lead-in cable.
4. To install, reverse the removal procedure.
-
Download the configuration information to the ACM.