Milan AWD L4-2.3L (2008)
Part 2
Disassembly
WARNING:
-
Always wear eye protection when servicing a vehicle. Failure to follow this instruction may result in serious personal injury.
-
Always carry or place a live air bag module with the air bag and deployment door/trim cover/tear seam pointed away from the body. Do
not set a live air bag module down with the deployment door/trim cover/tear seam face down. Failure to follow these instructions may
result in serious personal injury in the event of an accidental deployment.
-
Never probe the electrical connectors on air bag, safety canopy or side air curtain modules. Failure to follow this instruction may result in
the accidental deployment of these modules, which increases the risk of serious personal injury or death.
-
If the seat side air bag cover has been damaged or separated from its mounting, or if the air bag material has been exposed, install a new
seat side air bag module. Never try to repair the seat side air bag module. Failure to follow these instructions may result in the seat side
air bag deploying incorrectly, which increases the risk of serious personal injury or death in a crash.
-
Front seat backrest trim covers installed on seats equipped with seat side air bags cannot be repaired. A new trim cover must be installed.
Cleaning is permissible. Failure to follow these instructions may result in the seat side air bag module deploying incorrectly and increase
the risk of serious personal injury or death in a crash.
NOTE:
-
If a side air bag deployment took place, a new side air bag module and bolt must be installed. The side air bag module bracket on the backrest
