Milan AWD L4-2.3L (2008)
-
Connect the side air bag module electrical connector, then slide and engage the side air bag electrical connector locking clip. Route the wire
harness and attach any pin-type retainers.
16. Attach the first cushion trim cover J-clip to the rear of the cushion frame.
17. Attach the hook-and-loop strip and fasten the cushion trim cover around the safety belt buckle.
18. Install the LH recliner outboard cover and retainer to the recliner.
-
If equipped, route the heated seat wire harness to the LH recliner outboard cover.
19. Install the RH recliner outboard cover, retainer and retainer cover.
-
Route the side air bag wire harness to the RH recliner outboard cover.
