Milan AWD L4-2.3L (2008)
Passenger Seat Cushion (Part 2)
Special Tool(s)
Special Tool(s)
Removal and Installation
NOTE:
-
The air bag warning lamp illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal
operation and does not indicate a supplemental restraint system (SRS) fault.
-
The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
-
The cushion thermo-electric device (TED) filter is detachable from the TED assembly housing from underneath the seat cushion.
All seats
1. Remove the front seat.
-
Fully raise the seat before depowering the SRS to aid cushion TED assembly access.
2. Disconnect the TED electrical connector.
