Milan AWD L4-2.3L (2008)
^
Tighten to 12 Nm (9 lb-ft).
13. Install the engine plug bolt.
^
Tighten to 20 Nm (15 lb-ft).
Automatic transaxle vehicles
14. Install the RH halfshaft and the 2 halfshaft carrier bearing bracket bolts.
^
Tighten to 40 Nm (30 lb-ft).
All vehicles
15. If equipped, install the underbody cover and the 7 screws.
16. Install the accessory drive belt.
17. Install the VCT solenoid.
