Milan AWD L4-2.3L (2008)
Removal
CAUTION: When repairing the power steering system, care should be taken to prevent the entry of foreign material, or failure of the power
steering components may result.
All engines
1. Place the steering wheel in the straight-ahead position and the ignition key in the OFF position.
2. Remove the front wheel and tire.
3. Remove the 2 lower steering column shaft joint cover nuts and the cover.
4. CAUTION: Do not allow the steering column to rotate while the steering column shaft is disconnected from the steering gear or damage
to the clockspring may occur. If there is evidence that the steering column has rotated, the clockspring must be removed and recentered.
For additional information, refer to Air Bag Systems.
CAUTION: Make sure to correctly index-mark the steering gear to steering column shaft position or unequal right-to-left turns may
occur, causing tire contact with the body and/or clockspring damage.
Index-mark the steering column shaft-to-steering gear position for reference during installation.
