Milan AWD L4-2.3L (2008)
Install the new rear wheel hub nut.
^
To install, tighten to 255 Nm (188 lb-ft).
6. Stake the new nut in line with the keyway to a recommended minimum depth of 1 mm (0.039 in) below the keyway diameter to engage the locking
feature.
7. Install the 4 rear toe link bracket nuts.
^
Tighten to 90 Nm (66 lb-ft).
8. Install the lower shock absorber bolt and nut.
^
Tighten to 115 Nm (85 lb-ft).
9. Install the axle shaft speed sensor and bolt.
^
Tighten to 23 Nm (17 lb-ft).
