Milan FWD L4-2.3L (2008)
Keyless Entry Transmitter: Service and Repair
Remote Memory Activation
REMOTE MEMORY ACTIVATION
1. Position the driver seat and mirrors to the desired position.
2. Press the set button on the driver door panel.
3. Within 5 seconds press the 1 or 2 button on the driver door panel. This stores the configuration for driver 1 or driver 2.
4. Press the set button.
5. Within 5 seconds, press any button on the integrated keyhead transmitter (IKT) and then press the 1 or 2 button on the driver door panel to
associate the IKT with that position.
6. If a second memory setting is desired, repeat the procedure with the second integrated key.
