mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6272 > < Initial Inspection and Diagnostic Overview|Page 6270
Page 7
background image

allows the compass module to compensate for vehicle factors that influence the accuracy of the compass.

This pinpoint test is intended to diagnose the following:

-

Vehicle magnetization

-

Zone setting

-

Calibration

-

Compass module

D1-D3

Test E: The DRIVER DOOR, PASSENGER DOOR, REAR LEFT DOOR, REAR RIGHT DOOR Or
TRUNK AJAR Warning Message Is Inoperative

PINPOINT TEST E: THE DRIVER DOOR, PASSENGER DOOR, REAR LEFT DOOR, REAR RIGHT DOOR OR TRUNK AJAR
WARNING MESSAGE IS INOPERATIVE

Normal Operation

The DRIVER DOOR, PASSENGER DOOR, REAR LEFT DOOR, REAR RIGHT DOOR or TRUNK AJAR warning informs the driver if any of the
vehicle doors are not completely closed. The information is sent from the smart junction box (SJB) to the instrument cluster (IC) over the
communication network.

This pinpoint test is intended to diagnose the following:

-

SJB

-

Instrument cluster (IC)

Initial Inspection and Diagnostic Overview|Page 6272 > < Initial Inspection and Diagnostic Overview|Page 6270