Milan FWD L4-2.3L (2008)
14. Align the 2 retaining clips and install the RH instrument panel trim panel.
15. Through the glove compartment opening and the side of the instrument panel, install the 5 RH instrument panel trim panel nuts on the inside of the
instrument panel.
16. Install the instrument panel end panel.
Fusion and Milan
17. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment doors. Damage to the passenger air
bag module may occur.
NOTE: During air bag module installation, make sure all the deployment door clips are fully seated in the instrument panel.
