Milan FWD L4-2.3L (2008)
10. Remove the LH recliner outboard cover in the following sequence.
1
Pull out on the LH recliner outboard cover at the front and rear to release the cover retainers and at the bottom, pull the cover away from the
recliner.
2
Slide the LH recliner outboard cover back to separate from the recliner.
-
If not equipped with heated seats, remove the LH recliner outboard cover.
Seats with heat
11. Route out the heated seat wire harness and remove the LH recliner outboard cover.
All seats
12. Release the cushion trim cover retainer from around the safety belt buckle and separate the hook-and-loop strip.
13. Separate the cable at the LH recliner in the following sequence.
1
Separate the cable from the LH recliner.
